0132 Driftwood Gray 450 g

0132 Opal Driftwood Gray 450 g

Bullseye frits are made from crushed, screened and magnetically cleaned Bullseye Compatible sheet glass.

-0001 Fine frit, ranges from 0.2 to 1.2 mm, will tend to trap many small bubbles during the firing process and make the finished casting look opaque.

-0002 Medium frit, ranges from 1.2 to 2.7 mm, will also trap bubbles, but these will be slightly larger and fewer than those created using -0001. Using -0002 as a base glass will create a very homogenous blend with good transmission of light.

-0003 Coarse frit, ranges from 2.7 to 5.2 mm, will create fewer but larger bubbles than the mixes made with -0001 and -0002 and will appear less blended as each grain of -0003 becomes outlined in colour.

-0008 Powder with a grain size similar to flour, has the most varied uses. Colouring frit to achieve colour gradation, painterly use on top of sheet glass or making "wafers" for high detailed components in fusing or casting - and many more exciting options.

Please note: powders attract a surcharge of appr. 12%.