980.100 Pressure Blaster Model P 100

With this system the air and abrasive are mixed together under pressure. Both the air pressure and the abrasive flow can be individually regulated, so that the system is suited for very fine detailed projects as well as those requiring a large, high velocity volume of abrasive.

A pressure blaster is faster, more efficient and more flexible than a siphon system, which requires more than twice the operating pressure, twice as much air, and larger nozzles, making it only really suitable for surface-etching larger areas.

Takes 45kg of abrasive.

Pot height: 85cm

Pot diameter: 25cm

Hose length: 3m

Max. Pressure: 125psi / 8.4 bar

Required Air Volume: ca. 200 litres/min