Creative Ceramics Moulds for Fusing, Slumping & Casting
Ideally suited for art work, this mould makes a perfect focal object for a coffee table or side board etc.
The wide base of this mould makes an ideal charger at the dinner table. With a piece of glass smaller than the mould outline, you can use this mould for a dinner plate.
Instead of a circular and even glass shape, why not try a wavy or jagged outline, an oval or unevenly round shape.
Recommended Firing Chart
Please Read: This firing recommendation has been calculated for use with Bullseye Glass of average viscosity with an even thickness of 4 - 6 mm. The chart shown below is also based on the assumption that you are using a top fired kiln, e.g. Paragon GL22, GL24, BVD Flat bed kilns etc. If you are using a side firing kiln you must allow more time in the first ramp.
Please note that all our moulds are hand-made and therefore the dimensions may vary from those shown.