Cart is empty.
Product Information
Reference Number: | ||
Ref Code: | 958.140 |
|
Weight: | 1.800 kg |
Creative Ceramics Moulds for Fusing, Slumping & Casting
This semi cylindrical conical mould is designed for wall lamps or other wall pieces. By lining up two or several of these moulds lengthwise or sideways, you create a mould suited for a large wall or lighting piece or other free formed art work or try gluing two identically bent glass pieces together and add a base, you can create deep vessels, vases or freely constructed art work.
Recommended Firing Chart
Please Read: This firing recommendation has been calculated for use with Bullseye Glass of average viscosity with an even thickness of 4 - 6 mm. The chart shown below is also based on the assumption that you are using a top fired kiln, e.g. Paragon GL22, GL24, BVD Flat bed kilns etc. If you are using a side firing kiln you must allow more time in the first ramp.
Please note that all our moulds are hand-made and therefore the dimensions may vary from those shown.
4516