Creative Ceramics Moulds for Fusing, Slumping & CastingIdeal mould for series of artistic bowls or good bowls for serving snacks or small starters.
Whereas some like the swaying movement of the finished glass piece, some glue rubber pads to the base to make it more stable.
No matter how you place the glass on the mould, you will always end up with a perfectly spherical glass shape.
Recommended Firing Chart
Please Read: This firing recommendation has been calculated for use with Bullseye Glass of average viscosity with an even thickness of 4 - 6 mm. The chart shown below is also based on the assumption that you are using a top fired kiln, e.g. Paragon GL22, GL24, BVD Flat bed kilns etc. If you are using a side firing kiln you must allow more time in the first ramp.
Please note that all our moulds are hand-made and therefore the dimensions may vary from those shown.