Creative Ceramics Moulds for Fusing, Slumping & Casting
This mould is the second step for our 3-step deep slumping concept with mould models 958.138 and 958.291 Diam. 20 cm, depth 30 cm.
Recommended Firing Chart
Please Read: This firing recommendation has been calculated for use with Bullseye Glass of average viscosity with an even thickness of 4 - 6 mm. The chart shown below is also based on the assumption that you are using a top fired kiln, e.g. Paragon GL22, GL24, BVD Flat bed kilns etc. If you are using a side firing kiln you must allow more time in the first ramp.
Please note that all our moulds are hand-made and therefore the dimensions may vary from those shown.