Creative Ceramics Moulds for Fusing, Slumping & Casting
This is a very special mould to make a tiny but fairly deep bowl. The result can be a simple piece or artwork as well as a utilitarian object in the dining area.
Why not try, cutting a square piece instead of glass instead of the standard round.
The steep angle of the mould may result in an uneven slumping. Reposition the slumped piece and fire a second time.
Recommended Firing Chart
Please Read: This firing recommendation has been calculated for use with Bullseye Glass of average viscosity with an even thickness of 4 - 6 mm. The chart shown below is also based on the assumption that you are using a top fired kiln, e.g. Paragon GL22, GL24, BVD Flat bed kilns etc. If you are using a side firing kiln you must allow more time in the first ramp.
Please note that all our moulds are hand-made and therefore the dimensions may vary from those shown.