Creative Ceramics Moulds for Fusing, Slumping & Casting
The simplicity of the mould, slightly reminiscent of a barge, proposes various applications from art work to utilitarian objects.
Fuse identical pieces from two contrasting colours. The steep angle of this mould will reveal the bottom colour around the edges.
Recommended Firing Chart
Please Read: This firing recommendation has been calculated for use with Bullseye Glass of average viscosity with an even thickness of 4 - 6 mm. The chart shown below is also based on the assumption that you are using a top fired kiln, e.g. Paragon GL22, GL24, BVD Flat bed kilns etc. If you are using a side firing kiln you must allow more time in the first ramp.
Please note that all our moulds are hand-made and therefore the dimensions may vary from those shown.