Oceanside 96 Dark Green - Smooth - Iridescent - 3mm - Fusible

Transparent/Iridescent

This coloured glass is transparent with a smooth finish to both upper and lower surfaces; therefore, it offers good light transmission but, little obscurity particularly in the lighter shades. 

The addition of a micro-thin, Mother of Pearl, metallic coating which has been flash-fired onto the surface adds a beautiful shimmering effect.

This is part of a comprehensive range of tested compatible 96 COE glass manufactured by Oceanside Glass & Tile. With a thickness of 3mm it is suitable for both fused and stained-glass projects.  The glass is also suitable for kiln-casting, torchwork and glass blowing.

Sizes shown are approximate. Pattern and shade variations may occur in glass styles where 2 or more colours are mixed.

Notes:

- Not compatible with Bullseye 90 COE products

- Avoid contact with stained glass patinas as some of these can react with the metallic coating. Ensure careful application to solder/lead lines by using a small cotton bud.