MO-RE Boron Nitride Aerosol - 355g

951.270

10994

£54.60

£45.50 Excl. VAT

Out-of-Stock

MO-RE Spray n’ Fuseis the premier boron nitride mould release made especially for the fusing glass enthusiast and professional. Each masterpiece can be easily removed from your mould cleanly, without any post-fire work needed.

12 oz. (355g) spray cans.

Radically Different
Glass is the most difficult application to release, that’s why MO-RE has been specifically formulated for the art glass industry. With a non-flammable solvent base, MO-RE produces an effortless release for a wide array of moulds.

Reduce Prep Time
Application and clean-up are simple compared to brush-on primers; MO-RE sprays on quick and evenly with self-levelling capabilities. No exposed mould or mould sticking to glass piece.

Flawless Release
Eliminate post-fire work with MO-RE’s unique composition, allowing glass to move freely during the firing process.  When boron nitride release spray is applied evenly, each mould will release cleanly with no spiked edges or film left on the glass.  No need to grind off rough edges!

Reduce Cost per Application
MO-RE can be used sparingly, due to its self-leveling component one will never need to worry of an uneven surface or bare mould.  Only a light coating is necessary – by reducing the amount applied to each mould, less mould release is used during the application process.

 

951.270
New product

10994 0.460000

Related Products (There are 16 other products in the same category)

close Shopping Cart
close Shopping Cart